The Model SP-25 Stretch Wrap Forming Machine is the latest example of our efforts. Each hydraulic system is independently run off a single Lincoln electric motor, the best money can buy. That give us and you a big advantage in cost savings and maintenance. The entire stacked hydraulic system is by Parker/Hannifin and is tension and swing independent.

The Model SP-25 offers computer programmable learning control or manual control for maximum flexibility for large or small projects. It has a forming capacity of 25 tons, and power twist jaw rotation of 46 to 90 degrees. The distance between jaws is 288" to 355" with custom sizing configuration available. The tension cylinder stroke is 38", the tension cylinder swing is 35 degrees positive to 35 degrees negative. The total arm swing is 94 1/2 degrees for each arm; the arm swing speed while forming is .5 to 6 degrees per second and the same speed on the return.

The table height is 36" with tabletop to centerline of jaws available in 4, 6, 8 and 10" jaws. Power height adjustment is available. All hoses are off the ground. The Model SP-25 electrical requirements are 480 volts and 52 amps or 230 volts and 104 amps. The disconnect and control box arrive ready for your wiring scheme.